Nomadix AG 5500, User Manual, Page: 177 / 338

AG 5500
System Administration 165
Please note that while it is possible to set the value of a per-port configuration parameter
independently of the value of the corresponding global parameter, the feature itself is
disabled for a port unless both the per-port and global parameters are set to enabled. Thus:
z
RADIUS authentication for a port is enabled only if the RADIUS Client is globally
enabled AND the per-port enable RADIUS billing parameter is set.
z
Credit card billing for a port is enabled only if Credit Card Services is globally
enabled AND the per-port enable Credit Card billing parameter is set.
z
PMS billing for a port is enabled only if PMS Services is globally enabled AND the
per-port enable PMS billing parameter is set.
z
Tunneling for a port is enabled only if Tunneling is globally enabled AND the per-
port enable Tunneling parameter is set.
7.
Click on the
Add
button to save your changes (the message:
Entry added or updated in
the location file appears), or click on the Reset button if you want to reset all the values
to their previous state.
Updating a Port-Location Assignment
The procedure for updating a port-location assignment is similar to adding a port-location
assignment. The difference between the two procedures is how they are presented to you. For
example, if you already have port-locations assigned and you enter an existing “port” value,
each data field that you go through (port, location, state, and description) displays the value
currently assigned to the field.
To update a Port-Location assignment, simply update the fields with new values.
If you have updated a port-location assignment, you may want to change its
description to distinguish from the old assignment. Although the old assignment
will no longer exist in the system, a meaningful description can often be a
valuable quick reference guide.
ag5500_userguide.book Page 165 Tuesday, June 5, 2007 7:31 PM