Nomadix AG 5500, User Manual, Page: 111 / 338

AG 5500
System Administration 99
2. Enter your location information in the following fields:
z
Company Name
z
Address (Line 1 and Line 2)
z
City, State, Zip, and Country
z
E-mail Address
z
ISO Country Code
z
Phone Country Code
z
Calling Area Code
3. Select the area type that most resembles your location from the drop down list.
z
Enter a Network SSID/Zone.
You must reboot the system if you make changes to any of the following IP
settings.
You may lose your connection if you change the IP settings incorrectly (using
invalid IP addresses). If you “misconfigure” the AG 5500 and network
connectivity is lost, you can still access the AG 5500 from the Command Line
Interface (CLI) via a direct serial connection. In this case, refer to:
Powering
Up the System and “Logging In” on page 60 .
All IP addresses must be established, otherwise the AG 5500 will not be “visible”
on the network.
ag5500_userguide.book Page 99 Tuesday, June 5, 2007 7:31 PM