Nomadix AG 5500, User Manual, Page: 254 / 338

AG 5500
242 System Administration
3. Enter the Internal Port reference.
4. Enter a valid MAC Address .
5.
Enter the
External IP Address
.
6.
Enter the
External Port
reference.
7.
Optional : Enter the
Remote IP Address
. Leave this field set to zero if you want to connect
to the internal device from any network-side workstation.
8.
Optional : Enter the
Remote Port
reference. Leave this field set to zero if you want to
connect to the device from any TCP/UDP port of a network-side workstation.
9. Select the protocol ( TCP or UDP ) from the pull-down menu.
10. Click on the Add button to add this static port, or click on the Reset button to reset all
values to their previous state.
For more information about Static Port-Mapping, see also:
z
“Displaying the Static Port Mapping Table {Static Port-Mapping}” on page 158 .
z
“Deleting Static Ports {Static Port-Mapping Delete}” on page 243 .
The External IP address field will default to the IP address of the AG 5500.
ag5500_userguide.book Page 242 Tuesday, June 5, 2007 7:31 PM