background image

You can charge the spare battery easily using the charger it comes 

with.

If you remove the battery from its housing, do not use the device 

in the rain or underwater. You must remove the battery housing 

from the device as well and not leave it on the device should you 

want to use the device underwater.

Operating with a Powerbank

You can also power and charge the battery with a powerbank. To 

do this, just insert one of the ends of the cable supplied with the 

charger to the wired headphones / charger input socket and the 

other end to the powerbank. Please note that you will not be able 

to attach wired headphones to the device when a powerbank is 

attached to the device.

IMPORTANT!

 Do NOT use the detector underwater while connected 

to a power bank.

Low Battery Level

Battery icon on the display shows the battery life status. When 

the charge decreases, the bars inside the battery icon decrease, 

too. When battery is depleted, ''Lo'' message appears on display 

and the device shuts down.

BATTERY WARNINGS

Do not expose the device to extreme temperatures (for example a 

car's trunk or glove compartment)
Do not charge the battery in temperatures over 35° C (95° F) or 

below 0° C ( 32° F).
The LEGEND battery can only be replaced by Nokta Makro 

Detectors or its authorized service centers.

The LEGEND has an internal 5050mAh Lithium Polymer battery.
Battery runtime varies between 8-20 hours. Factors such 

as operating frequency, usage of speaker or wired/wireless 

headphones, display backlight, LED flashlight etc. will affect 

battery runtime.

Charging

Charge The LEGEND before initial use. Charging an empty battery 

will take approximately 3-4 hours.
To charge the battery, insert one of the ends of the cable supplied 

with the device to the wired headphones / charger input socket 

and the other end to the charging adapter.

You can use a regular, 5V 2A (minimum) USB power adapter to 

charge the device. The charging time will increase if you charge 

the device through the USB port on a PC.

WATERPROOF REPLACEABLE SPARE BATTERY

Included in The LEGEND Pro Pack only and sold separately as well, 

this battery can be used when the internal battery is empty and 

you do not have access to charging.
You can attach the spare battery easily as shown in the picture.

When you are using the spare battery, you cannot plug any wired 

headphones to the device.

BATTERY INFORMATION

4

Summary of Contents for The LEGEND































Reviews: