FREQUENCY
The LEGEND offers Multi frequency, where a wide range
of frequencies work simultaneously, as well as 5 single
frequencies.
You can switch between frequencies easily by
pressing the Frequency Button.
It is recommended to use Multi frequency in all modes. When Multi
frequency is selected the letter ''M'' appears on the screen. When a
single frequency is selected, the frequency is shown numerically on
the screen.
Frequency only affects the mode currently selected;
changes made in one mode do not affect the others.
Single Frequencies
Sometimes using single frequencies may provide an advantage
over Multi frequency. For example; if you are looking for larger
high conductive targets only, the 4kHz may be a better choice.
Similarly, if you are looking for shallow, thin jewelry, 20kHz and
40kHz may provide better results.
In areas where there is electromagnetic interference, single
frequencies may be less noisy compared to Multi frequency.
However, they will be less sensitive to many targets at the same
time.
4kHz will provide more depth specifically for larger silver coins and
relics compared to Multi and other frequencies but it will be noisy
in certain soil conditions.
Multi Frequency
Multi frequency which runs multiple frequencies simultaneously
gives the user the advantage of covering a broader range of
targets on all types of terrains.
Multi frequency, compared to single frequencies, typically provides
more accurate IDs at depth. In addition, it offers maximum depth
for a large range of metals with different sizes on wet salt beach
sand and underwater by minimizing ground noise.
Modes and Frequencies
Each search mode has been optimized with frequencies to offer
the best performance. For example, Park and Field modes work
in all single frequencies as well as Multi. On the other hand, the
Beach mode will only perform well in Multi frequency so single
frequencies cannot be selected in this mode. In addition, in the
Beach mode the Multi frequency has 2 options: Multi Wet (MW)
and Multi Dry (MD). When you press the Frequency Button in the
Beach mode, you will see a ''W'' or ''D'' next to the letter M.
The Goldfield mode, on the other hand, is optimized to detect
smaller low conductive targets and that is why the lower single
frequencies (4kHz, 10kHz and 15kHz) cannot be used in this mode.
PARK
Multi
4 kHz
10 kHz
15 kHz
20 kHz
40 kHz
FIELD
BEACH GOLDFIELD
9
Park
Goldfield
Beach
Field
Ferrous Targets
Nails, Iron...
Low Conductive Targets
Foil, Small Gold Jewelry,
Nickels, Coke...
Medium Conductive Targets
Coins, Large Jewelry,
Small Silver...
High Conductive Targets
Large Silver and
Copper Coins...
High Frequencies
provide better results
Simultaneous Multi Frequency provides better results for all targets
Low Frequencies
provide better results
