3. Volume
This control allows you to increase or decrease the device's
volume based on your preference and environmental
conditions.
Volume setting consists of 6 levels and it is set to 3 by default.
When you turn off and on the device, it will start with the last
volume level you chose.
This setting is common to all modes; changes will
take effect in all modes.
Adjusting the Volume
1. Press the Power & Settings Button once. Select volume using
the left and right buttons. The current value will be displayed on
screen.
2. Change the volume level using the plus (+) and minus (-) buttons.
3. Press the Power & Settings Button once to go back to the main
screen.
Because the volume level affects power consumption, we
recommend you not to increase it more than necessary.
IMPORTANT!
When you change the volume of the device with
this setting, the volume of the metal zones adjusted by the
Tone Volume setting will also change proportionally.
You can connect wired headphones to the device with the
headphones adapter cable sold separately. The volume for
the headphones is also adjusted through the volume setting
of the device.
When wired headphones are attached, headphones icon will
appear in the info section at the top of the screen.
4. Tone Settings
These advanced tone settings offer various options to
modify the sounds The LEGEND generates for targets.
The tone setting offers 6 sub settings as follows: Number of
Tones , Tone Volume, Tone Frequency, Tone Break, Threshold Level,
Threshold Frequency.
Press the Power & Settings Button once. Select the tone setting
using the left and right buttons.
When tone is selected, you can see all the tone settings in the second
row over the settings. To the left of these settings, you will also see
the icons of buttons to guide you while adjusting these settings.
When the Number of Tones is 1, there is no tone break point, so
the Tone Break setting will not be selectable in the menu.
In the Goldfield mode, the Number of Tones is 1 and cannot be
changed. In addition, the Tone Frequency is also not adjustable
in this mode. Therefore, these 2 settings will not be active in the
tone settings menu when the Goldfield mode is selected.
To go into the tone settings menu, press the plus (+) button once.
The selected setting will be shown framed. Using the right and left
buttons, you can navigate between the settings. You can go back to
the settings by pressing the Pinpoint & Accept/Reject Button once.
IMPORTANT!
To go back to the main screen directly from the
tone settings menu, press the Power & Settings Button once.
Press
once
16
Park
Goldfield
Beach
Field
