(1)
After inserting the washers on the lower shaft, place the lower
shaft in its location on the search coil. Secure by tightening the
screw and nut. Do not overtighten.
(2)
To join the middle rod with the upper and lower rods, open the
lever latches and engage the pieces together. After adjusting the
length of the device to your height, press the latches to secure.
(3)
Wind the search coil cable on the shaft without stretching too
much. Then, plug the connector to the search coil input socket on
the system box and secure by tightening the nut. While tightening,
you may hear clicks indicating that the connector is secured.
(4)
If you want to adjust the armrest, first remove the screws. After
sliding the armrest up or down one level, align the holes and secure
by tightening the screws. You can attach the spare screw to the
empty hole if you do not want to lose it.
(5)
Insert the armrest strap as shown in the picture and adjust it
to your arm size and tighten.
1
2
2
4
3
5
ASSEMBLY
1
