Nokia IP100 Series, Installation Manual

Page: 46 / 106

32 IP100 Series Installation Guide
To select an interface, type the number to the left of its physical
ID. You will use this interface to access Voyager using a web
browser in order to perform configuration tasks.
B.
Enter the IP address for the interface you selected. The expected
format for an IP address is nnn.nnn.nnn.nnn. An example might
be:
192.168.231.111
C.
Depending upon your network connection, indicate whether to
use half duplex or full duplex (half duplex is the default).
D.
Also depending upon your network connection, indicate whether
to set the interface at 10 Mbits/sec (the default) or 100 Mbits/sec.
Step 5—Confirming the Setup
Confirm your entries by typing
Y
to return to the interface selection menu
in Step 4. On this menu, type
4
to exit system startup.
Change your entries by typing
N
to return to the menu in Step 4. When
you have finished changing entries, confirm your entries. Then exit
system startup.