Nokia IP100 Series, Installation Manual

Page: 43 / 106

IP100 Series Installation Guide 29
Using System Startup
Using System Startup
When you first boot up an IP100 Series NAP, the console screen displays
miscellaneous information (such as memory checks). The following text
(Figure 3-1) then displays on your screen:
Syncing disks... done
Rebooting...
Verifying DMI Pool Data.....
1 Bootmgr
2 IPSO
Default: 1
Figure 3-1. Screen that appears when first booting the NAP
Do nothing when you see this screen. After five seconds the system
startup procedure automatically starts.
Step 1—Assigning a Hostname
System startup first requests a hostname for the NAP.
At the
Hostname?
prompt do the following:
A.
Type a hostname. You can use any alphanumeric characters in
upper or lower case (a-z, 0-9), dashes (–), and dots (.). What you
type is case sensitive so every time you enter your hostname you
must enter it in exactly the same way.
B.
Confirm your entry by re-entering it.