NKT Photonics Koheras ACOUSTIK, Product Manual

Page: 50 / 96

Enabling emission from an individual BASIK module
50
Enabling emission from an individual BASIK module
To enable emission from an individual BASIK module inserted in an ACOUSTIK
system, follow the steps in
Procedure 5 .
Note: The modules are equipped with internal temperature sensors that monitor
the temperature of sensitive components. If these components are outside their
specified temperature range, emission is disabled.
7 Observe status and parameters of individual modules in the Module overview panel.
8 a Set the reference wavelength offset for all
inserted ACOUSTIK modules using the
slider in the Wavelength offset setting
control. To adjust the wavelength, click-
hold the slider to change its position.
a Alternatively, enter the wavelength in
nanometer units by typing the value into
the offset input field at the upper right
corner.
9 To disable emission – click the Emission
button once.
Action
Status indicators for
individual modules
λ
offset input field
λ
offset slider
Click once to
disable emission
Status and emission
indicators turn OFF