NKT Photonics Koheras ACOUSTIK, Product Manual

Page: 33 / 96

33
Placing the system on a surface
Placing the system on a surface
For installations where the system is placed on a level surface such as a table or
otherwise, the system is equipped with four (4) rubber feet on its bottom panel.
Ensure to include adequate space at the rear of the system so that the cooling
fins can effectively dissipate the heat generated by the modules in the system.
Additionally, the surface should be free from vibrations and any source that could
cause temperature variations.
Operating and storage environment
Appendix A details the required ambient operating and storage environment
specifications.
Warning: Although The Koheras ACOUSTIK itself is a 16-slot system, it houses
both class 3B and class 4 laser products, therefore its operation facility and con-
dition must comply with the standards listed below or similar:
•
CFR21 1040.10 & Laser Notice LN50
•
IEC / EN 60825-1