NKT Photonics Koheras ACOUSTIK, Product Manual

Page: 59 / 96

59
Navigation
Toggling panels
Use the Menu > Window drop down menu to check and uncheck panels to be
displayed. A blue highlighted check mark indicates the panel is displayed.
Figure 22 Panels dragged outside the main window
Note: Clicking the X in the upper right corner of any panel will also close it.
Connecting to the
ACOUSTIK
When CONTROL is launched, the Welcome panel is displayed as in Figure 23 . In
the menu bar, click the Connect drop down menu and then click on the COM port
your ACOUSTIK is connected over. The Control and Status panels are displayed
when the system connects to CONTROL.
See “Connecting the ACOUSTIK to a PC with CONTROL” on page 43
Figure 23 Welcome screen and connecting
Navigation
CONTROL can connect to either the system controller or the individual modules
in the system slots. To select the system controller or a module, click on the icons
in the
Device Selector panel of control as shown in Figure 24 .
Check the panels to
display them
Click