Chapter
3: Web Management
Security - Network - DHCP - Relay
PoE Switch User Manual | 90
Configure an ACE (Access Control Entry) on this page.
An ACE consists of several parameters. These parameters vary according to the frame
type that you select. First select the ingress port for the ACE, and then select the frame
type. Different parameter options are displayed depending on the frame type selected.
A frame that hits this ACE matches the configuration that is defined here.
Ingress Port
Select the ingress port for which this ACE applies.
All:
The ACE applies to all port.
Port n:
The ACE applies to this port number, where n is the number of the switch
port.
Policy Filter
Specify the policy number filter for this ACE.
Any:
No policy filter is specified. (policy filter status is "don't-care".)
Specific:
If you want to filter a specific policy with this ACE, choose this value. Two
field for entering an policy value and bitmask appears.
Policy Value
When "Specific" is selected for the policy filter, you can enter a specific policy value. The
allowed range is 0 to 255.
Policy Bitmask
When "Specific" is selected for the policy filter, you can enter a specific policy bitmask. The
allowed range is 0x0 to 0xff.
Switch
Select the switch to which this ACE applies.
Any:
The ACE applies to any port.
Switch n:
The ACE applies to this switch number, where n is the number of the
switch.
