Chapter
3: Web Management
VCL - Port-based VLAN - Protocol to Group
PoE Switch User Manual | 168
3.1.17.2. VCL - Port-based VLAN
3.1.17.2.1. VCL - Port-based VLAN - Protocol to Group
This page allows you to add new protocols to Group Name (unique for each Group)
mapping entries as well as allow you to see and delete already mapped entries for the
selected stack switch unit.
Delete
To delete a Protocol to Group Name map entry, check this box. The entry will be deleted on
the switch during the next Save.
Frame Type
Frame Type can have one of the following values:
1.
Ethernet
2.
LLC
3.
SNAP
Note:
On changing the Frame type field, valid value of the following text field will vary
depending on the new frame type you selected.
Value
Valid value that can be entered in this text field depends on the option selected from the the
preceding Frame Type selection menu.
Below is the criteria for three different Frame Types:
1.
For Ethernet: Values in the text field when Ethernet is selected as a Frame Type is
called etype. Valid values for etype ranges from 0x0600-0xffff
2.
For LLC: Valid value in this case is comprised of two different sub-values.
a.
DSAP:
1-byte long string (0x00-0xff)
b.
SSAP:
1-byte long string (0x00-0xff)
3.
For SNAP: Valid value in this case also is comprised of two different sub-values.
a.
OUI:
OUI (Organizationally Unique Identifier) is value in format of xx-xx-xx where
each pair (xx) in string is a hexadecimal value ranges from 0x00-0xff.
b.
PID:
If the OUI is hexadecimal 000000, the protocol ID is the Ethernet type
(EtherType) field value for the protocol running on top of SNAP; if the OUI is an
