Chapter
3: Web Management
Green Ethernet - LED
PoE Switch User Manual | 35
LEDs Intensity
The LEDs power consumption can be reduced by lowering the LEDs intensity. LEDs intensity
could for example be lowered during night time, or they could be turn completely off. It is
possible to configure 24 different hours of the day, at where the LEDs intensity should be set.
Start Time
The time at which the LEDs intensity shall be set to the corresponding intensity.
End Time
The time at which the LEDs intensity shall be set to a new intensity. If no intensity is specified
for the next hour, the intensity is set to default intensity.
Intensity
The LEDs intensity (100% = Full power, 0% = LED off).
Maintenance
Maintenance Time
When a network administrator does maintenance of the switch (e.g. adding or moving users)
he might want to have full LED intensity during the maintenance period. Therefore it is
possible to specify that the LEDs shall use full intensity a specific period of time. Maintenance
Time is the number of seconds that the LEDs will have full intensity after either a port has
changed link state, or the LED pushbutton has been pushed.
Buttons
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
