Chapter
3: Web Management
VCL - IP Subnet-based VLAN
PoE Switch User Manual | 171
3.1.17.3. VCL - IP Subnet-based VLAN
The IP subnet-based VLAN entries can be configured here. This page allows for adding,
updating and deleting IP subnet-based VLAN entries and assigning the entries to different
ports. This page shows only static entries.
Delete
To delete a IP subnet-based VLAN entry, check this box and press save. The entry will be
deleted on the selected switch in the stack.
VCE ID
Indicates the index of the entry. It is user configurable. It's value ranges from 0-128. If a VCE
ID is 0, application will auto-generate the VCE ID for that entry. Deletion and lookup of IP
subnet-based VLAN are based on VCE ID.
IP Address
Indicates the IP address.
Mask Length
Indicates the network mask length.
VLAN ID
Indicates the VLAN ID. VLAN ID can be changed for the existing entries.
Port Members
A row of check boxes for each port is displayed for each IP subnet-based VLAN entry. To
include a port in a IP subnet-based VLAN, check the box. To remove or exclude the port from
the IP subnet-based VLAN, make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.
Adding a New IP subnet-based VLAN
Click
“
Add New Entry
” to add a new IP subnet-based VLAN entry. An empty row is added to
the table, and the IP subnet-based VLAN entry can be configured as needed. Any IP
address/mask can be configured for the IP subnet-based VLAN entry. Legal values for a
VLAN ID are 1 through 4095.
The IP subnet-based VLAN entry is enabled on the selected stack switch unit when you click
on "Save". The
“
Delete
” button can be used to undo the addition of new IP subnet-based
VLANs. The maximum possible IP subnet-based VLAN entries are limited to 128.
