Chapter
3: Web Management
IPMC Profile - Address Entry
PoE Switch User Manual | 130
3.1.9.2. IPMC Profile - Address Entry
This page provides address range settings used in IPMC profile.
The address entry is used to specify the address range that will be associated with IPMC
Profile. It is allowed to create at maximum 128 address entries in the system.
Delete
Check to delete the entry.
The designated entry will be deleted during the next save.
Entry Name
The name used for indexing the address entry table.
Each entry has the unique name which is composed of at maximum 16 alphabetic and
numeric characters. At least one alphabet must be present.
Start Address
The starting IPv4/IPv6 Multicast Group Address that will be used as an address range.
End Address
The ending IPv4/IPv6 Multicast Group Address that will be used as an address range.
Buttons
Add New Address (Range) Entry:
Click to add new address range. Specify the name
and configure the addresses. Click "Save"
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
Refresh:
Refreshes the displayed table starting from the input fields.
|<<:
Updates the table starting from the first entry in the IPMC Profile Address
Configuration.
>>:
Updates the table, starting with the entry after the last entry currently displayed.
