Chapter
3: Web Management
Security - Network - ARP Inspection
PoE Switch User Manual | 246
3.2.5.2.6. Security - Network - ARP Inspection
Entries in the Dynamic ARP Inspection Table are shown on this page. The Dynamic ARP
Inspection Table contains up to 1024 entries, and is sorted first by port, then by VLAN ID,
then by MAC address, and then by IP address.
Navigating the ARP Inspection Table
Each page shows up to 99 entries from the Dynamic ARP Inspection table, default being 20,
selected through the "entries per page" input field. When first visited, the web page will
show the first 20 entries from the beginning of the Dynamic ARP Inspection Table.
The "Start from port address", "VLAN", "MAC address" and "IP address" input fields allow
the user to select the starting point in the Dynamic ARP Inspection Table. Clicking the
Refresh button will update the displayed table starting from that or the closest next
Dynamic ARP Inspection Table match. In addition, the two input fields will - upon a Refresh
button click - assume the value of the first displayed entry, allowing for continuous refresh
with the same start address.
The
“<<” button will use the last entry of the currently displayed table as a basis for the next
lookup. When the end is reached the text "No more entries" is shown in the displayed table.
Use the
“>>|” button to start over.
ARP Inspection Table Columns
Port
Switch Port Number for which the entries are displayed.
VLAN ID
VLAN-ID in which the ARP traffic is permitted.
MAC Address
User MAC address of the entry.
IP Address
User IP address of the entry.
