Chapter
3: Web Management
Security - Switch - Users
NGSME48T4H Switch User Manual | 48
3.1.5. Configuration - Security
This section provides settings regarding to the switch’s security functions. Settings
provided here can be divided into 3 categories:
Switch:
Here you can make security settings regarding to the switch itself.
Network:
Providing security settings regarding to the network.
AAA:
Here you can set RADIUS and authentication settings.
3.1.5.1. Security - Switch - Users
This page provides an overview of the current users. Currently the only way to login as
another user on the web server is to close and reopen the browser.
User Name
The name of the user. You can also click on the link to configure user account.
Privilege Level
The privilege level of the user. The allowed range is 1 to 15. If the privilege level value is 15, it
can access all groups, i.e. that is granted the fully control of the device. But others value need
to refer to each group privilege level. User's privilege should be same or greater than the
group privilege level to have the access of that group. By default setting, most group
privileges level 5 has the read-only access and privilege level 10 has the read-write access.
And the system maintenance (software upload, factory defaults and etc.) need user privilege
level 15. Generally, the privilege level 15 can be used for an administrator account, privilege
level 10 for a standard user account and privilege level 5 for a guest account.
Buttons
Add New User:
Click to add a new user.
