Chapter
3: Web Management
Security - Network - ACL - Ports
PoE Switch User Manual | 85
3.1.5.11. Security - Network - ACL
3.1.5.11.1. Security - Network - ACL - Ports
Configure the ACL parameters (ACE) of each switch port. These parameters will affect
frames received on a port unless the frame matches a specific ACE.
The settings relate to the currently selected stack unit, as reflected by the page header.
Port
The logical port for the settings contained in the same row.
Policy ID
Select the policy to apply to this port. The allowed values are 0 through 255. The default
value is 0.
Action
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default value is
"Permit".
Rate Limiter ID
Select which rate limiter to apply on this port. The allowed values are Disabled or the
values 1 through 16. The default value is "Disabled".
Port Redirect
Select which port frames are redirected on. The allowed values are Disabled or a specific
port number and it can't be set when action is permitted. The default value is "Disabled".
