Instruction Manual MA-3000+RD-5+SC-5
NIC-TD-0000015-05
29
4.5. Setting out of tabulation conditions
Click this icon , and " Table Condition” is opened.
Each conditions and unit are available to be selected.
*
When both standard solution and unspecified sample are pre-treated by same
condition, choo
se sample amount “none” in unit. In this case, 3 parameters (the
input of capacity, and aliquot the amount of samples and the amount of constant)
are omissible.
*
Select the Calibration Curve according to the official method and the curve
passing through the blank (+Blank) with measurements of trace quantities of
mercury close to the blank value enable the best measurement results.
Summary of Contents for MA-3000 RD-5+SC-5
Page 2: ......
