Instruction Manual MA-3000+RD-5+SC-5
NIC-TD-0000015-05
42
6) Separate the dispensing block, tube packing and dispensing cap, and pull the
tubes out of the tube packing.
7) Pass the bubbler through the holes in the dispensing cap and tube packing.
8) Align the position of the hole in the dispensing block with that in the tube
packing, set the bending direction of the tube as shown in the figure, and pass
the reaction tube through the arm block, dispensing block and tube packing in
that order.
9) Pass the three reagent tubes in the same way.
Make the obliquely cut surfaces of the reagent tubes face the bubbler.
Dispensing
block
Tube packing
Dispensing
cap
Bending direction
Reaction tube (green)
Arm block
Dispensing block
Tube packing
Bending direction
Summary of Contents for MA-3000 RD-5+SC-5
Page 2: ......
