Instruction Manual MA-3000+RD-5+SC-5
NIC-TD-0000015-05
19
2) Adjust the position of the washing tank in the following procedure.
1) Turn ON the main power supply switch of MA-3.
Open the “Setup” window
from System (S)-Setup and Measurement Method sets
“REDUCTION-DIRECT” and option unit sets “SC5+RD5”.
2) Turn ON the SC-5.
3)
Open the “Maintenance” window from Run -ARM sets “RINSE” and LIFT sets
“RINSE”. The arm lower to the rinse position.
4) Loosen M4 hexagon socket head cap screws,
so that the washing tank center
will meet the cap portion center, to adjust the position of the washing tank
holder.
Also adjustment of the right and left direction is done by loosening the M4
resin screws.
Washing tank
M4 resin screws
M4 hexagon socket
head cap screws
Washing tank holder
Left/Right
direction
Summary of Contents for MA-3000 RD-5+SC-5
Page 2: ......
