![NIKKARI SSBC Instruction Manual Download Page 8](http://html1.mh-extra.com/html/nikkari/ssbc/ssbc_instruction-manual_1689295008.webp)
8
When there is any obstacle (wires, etc.) which cannot be removed near the
branches to be cut, cut the branches while taking care so as not to allow the
blade to get contact with such obstacle during cutting.
* Otherwise, a person could fall down due to the impact and get contact with the blade,
resulting in serious injury. Or the scattered pieces of obstacles could get in your eyes,
resulting in injury such as sight loss.
If the edge of the blade is blunt or damaged, do not operate the brush cutter.
* Otherwise, it could cause damage to the engine and machine due to overloading.
When working near the car or building, keep the things around away from the
working area.
Cover the immovable thing with the heavy-duty sheets or do not operate at the
area.
* If it is operated near the car and the building, scattered gravel stone, etc. could cause
damage.
Check if there is any obstacle (empty cans, wires, pebbles, bands, etc.) or not.
If there is any obstacle, remove it before operating the brush cutter.
* Scattering of the broken pieces of the damaged blade, etc. could result in injury
accident.
Foreign substance such as wires and bands could be caught in the blade, breaking the
blade or gears.
1.2.4 Precautions at Start-up
The brush cutter must be started in a non-slippery and firm place.
* Otherwise, it will cause falling, resulting in serious injury.
The
brush cutter
must be started or operated by one person.
* If it is operated by more than one person, it could be miss-handled, and it could contact
with a person or objects, resulting in accident.
When starting the brush cutter, make sure that the cutting part is not touching
the ground or obstacles.
* Otherwise, you could fall down and get severly injured due to contact with the cutting
part.
It could also cause the objects to scatter, resulting in injury such as sight loss.