manualshive.com logo in svg

NIKKARI SSBC, Instruction Manual

Share
Download
NIKKARI SSBC Instruction Manual Download Page 6

6

1.2  General Precautions

1.2.1 Overall Precautions

When handling the brush cutter, follow the precautions of the powerhead manual in addition to the 
following precautions.

Do not use for the branch cutting etc.

*  The cut branches and the brush cutter fall on the head, resulting in injury.

Do not use the brush cutter when you are tired or under the influence of 
alcohol or other drugs. 

*  You will be distracted or not be able to use the brush cutter appropriately, causing a 

serious accident.

Do not use the brush cutter with the blade guard removed.

*  It could cause a serious accident by the scattered stones, etc.

Make sure that the knob bolt at the connection is tightened when installing the 
attachment.

*  The attachment  will come off, resulting in a serious accident.

Do not use the brush cutter for any purpose other than the grass cutting.

*  Otherwise, it could cause unexpected injury, and damage the brush cutter.

Do not allow minors to operate the brush cutter.

*  It could cause a serious accident.

Do not modify the brush cutter.

*  It could deteriorate the performance, resulting in a serious accident due to deterioration 

on safety.

Do not install any unapproved powerhead to the attachment.

*  The attachment could come off during use, resulting in a serious accident.

Do not remove the safety devices.

*  A serious accident could result due to deterioration on safety.

Do not touch the cutting part during operation.

*  It could cause injury.

When renting or hand over the brush cutter to any third person, attach the  
instruction manual and attached materials.

*  Otherwise, a serious accident will happen.

Summary of Contents for SSBC













































Reviews:

No comments

Brands by name

Popular brands

Load more brands