11
Wear gloves when handling the cutting part during the replacement, etc.
* Otherwise, hands or fingers could be severed by the cutting parts.
Use a designated grease (JX Nippon Oil & Energy : MOLYNOC No.2).
* Otherwise, the gears etc. could be damaged.
1.2.7 Precautions for Troubleshooting
When troubleshooting, stop the engine and then remove the attachment from
the powerhead.
* If the engine starts during the work, hands or fingers could be severed by the moving
parts or cutting part.
1.2.8 Precautions for Transporting
Do not transport the brush cutter by a bicycle and a motorbike.
* When the brush cutter is dropped, it could cause injury to the operator unexpectedly and
damage to the brush cutter.
When transporting the brush cutter, wear appropriate clothes and personal
protective equipment.
* Otherwise, it could cause injury.
Before transporting the brush cutter, stop the engine, and make the cutting
part stopped.
For iron blade (option), install the transportation guard (option).
* Body, hands or fingers could be severed or objects could be damaged by contact with
the cutting part.
When transporting the brush cutter, install it to a harness or keep the balance
with the shaft tube.
* Otherwise, the brush cutter could fall off, resulting in injury or damage of the brush
cutter.
Remove obstacles, and watch your step when transporting the brush cutter.
* If the footing is insecure, an accident due to tripping over or falling could happen.
Before transporting the brush cutter put on the back of the truck, etc., remove
the attachment from the powerhead, and then fix it so as not to move.
* Otherwise, the attachment could fall off the truck, causing injury or damage to the brush
cutter.
