114
CE Declaration of Conformity
and declaration of incorporation of partly completed machinery
Declaration in accordance with the following Directives: 2004/108/EC (EMC); 2006/42/EC (MD) annex II, part B
Note
- The content of this declaration corresponds to that specified in the official document deposited at the Nice S.p.A. headquarters
and, in particular, to the latest revised edition available prior to the publishing of this manual. The text herein has been re-edited for
editorial purposes. A copy of the original declaration can be requested from Nice S.p.A. (prov. of Treviso) Italy.
Number:
152/A60
Revision:
5
Language:
EN
Manufacturer’s name:
Nice s.p.a.
Address:
Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
Person authorized to compile
the technical documentation:
Nice s.p.a.
Address:
Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
Type of product:
Control unit for 2 230V AC motor
Models:
A60
Accessories:
Radio receiver model SMXI
The undersigned, Mauro Sordini, in the role of Chief Executive Officer, declares under his sole responsibility, that the product specified
above conforms to the provisions of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 15 December 2004 regarding the approximation of
member state legislation related to electromagnetic compatibility, repealing directive 89/336/EEC, according to the following stand-
ards: EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
The product also complies with the following directives according to the requirements envisaged for “quasi machinery”:
Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 related to machinery, and which amends
the directive 95/16/EC (recast).
• It is hereby declared that the pertinent technical documentation has been compiled in compliance with appendix VII B of directive 2006/42/EC and
that the following essential requirements have been observed: 1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
• The manufacturer undertakes to transmit to the national authorities, in response to a motivated request, all information regarding the “quasi-machine”,
while maintaining full rights to the related intellectual property.
• Should the “quasi machine” be put into service in a European country with an official language other than that used in this declaration, the importer
is obliged to arrange for the relative translation to accompany this declaration.
• The “quasi-machine” must not be used until the final machine in which it is incorporated is in turn declared as compliant, if applicable, with the provi-
sions of directive 2006/42/EC.
The product also complies with the following standards:
EN 60335-1:2012 EN 60335-2-103:2003+A11:2009
The product complies, within the constraints of applicable parts, with the following standards:
EN 13241-1:2003+A1:2011, EN 12445:2002, EN 12453:2002, EN 12978:2003+A1:2009
Oderzo, 3 July 2014
Ing.
Mauro
Sordini
(Chief Executive Officer)
EN
www.metalines.com
