Nice E FIT MP 1517, Instructions And Warnings For Installation And Use

Page: 7 / 56

English –
6
4
the end
=
5
sec
5
Keep both buttons
pressed at the
same time count 3 movements release the buttons
Note – When performing the procedure, at any time you can cancel it by keeping the
n
and
t
keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements.
4.9 - Adjusting height (“H”) for partial opening/closing
The motor can manage up to 30 partial openings/closings, each called “H height”. These heights can only be adjusted after adjusting limit switches “0” and “1”. The
following procedure makes it possible to adjust one “H” height at a time.
WARNINGS
•
If you want to change the position of a given “H” height that is already memorized, repeat the present procedure by pressing the key associated with that height at
point 7.
• The first memorised position “H” overwrites the default pre-memorised position
1 2 3

4
=
5
sec
2
=
5
sec
4
Bring the shutter
up for half its
stroke Keep the button
pressed count 2 movements release the button Keep the button
pressed count 4 movements release the button
4 5

6
= 5 sec
2
“ H ”
Keep both buttons
pressed at the
same time count 2 movements release the buttons Fine adjustment of position : Perform key pulsing on the
s
key
and
t
key until the rolling shutter is brought to the partial height
you want (at each pulse the rolling shutter moves a few millimetres)
6

7
= 5 sec
3
Keep the button
pressed count 3 movements release the button
Note – When performing the procedure, you can cancel it at any time by keeping the
n
and
t
keys pressed simultaneously for 4 seconds. Otherwise, do not press
any key and wait 60 seconds for the motor to perform 6 movements.
(other transmitter)
To memorize the FIRST “H” height
on the transmitter you are using for this procedure
7
the end
= 5 sec
4
Keep both buttons
pressed at the
same time count 4 movements release the buttons
To memorize the NEXT “H” height
on the new unmemorized transmitter
7
the end
4
Keep the desired
button pressed count 4 movements release the button
English –
6
EN