63
NIBE BA-SVM 10-200
Section 10 |
Service operations
CAUTION
For the following functions to work the USB memory
must contain files with software for the controller.
CAUTION
A software update does not reset the menu settings in
the controller.
CAUTION
If the update is interrupted before it is complete (for ex-
ample due to a power cut etc.), the software can be re-
set to the previous version by holding down the OK but-
ton during start-up until the lamp lights up green (takes
approx. 10 seconds).
USB service outlet
LEK
The display unit is equipped with a USB outlet that
can be used to update the software, save logged in-
formation and manage the settings in the controller.
The fact box at the top of the display shows informa-
tion on the most likely update that the software has
selected from the USB memory.
This information states the product for which the
software is intended, the software version and gen-
eral information about it. If you wish to choose a dif-
ferent file than the one selected, the correct file can
be selected by pressing “select a different file”.
Start the update
Select “start the update” if you wish to start the up-
date. You will be asked whether you really want to
update the software. Click “yes” to proceed or “no”
to go back. If you responded “yes” to the previous
question, the update will start and you can now fol-
low the progress of the update on the display. After
the update is complete, your controller will reboot.
This allows the software to be updated in the controller.
When a USB memory stick is connected, a new
menu (menu 7) appears on the display.
Menu 7.1 - Update system software
INDOOR CLIMATE
MY SYSTEM
INFO
HOT WATER
USB
update firmware
USB 7
logging
manage settings
update firmware 7.1
start updating
choose another file
Summary of Contents for BA-SVM 10-200 Series
Page 2: ......
Page 86: ...86 NIBE BA SVM 10 200 ...
Page 87: ......
Page 88: ...NIBE Group Hannabadsvägen 5 285 32 Markaryd Sweden www nibe eu ...
