62
4.
BASIC OPERATION
MULTIFUNCTION GENERATOR
○
Pulse width duty
→
Pulse width time
When the pulse width duty input field opens and the current pulse width duty is
displayed, the [Width] soft key is displayed. Press this soft key to open the pulse width
time input field and change the item display from [Duty] to [Width]. The [Width] soft key
changes to [Duty].
d) Difference between pulse width time setting and duty setting
The following operation differences exist depending on whether the pulse width is set with
time or duty.
e) Leading edge time and trailing edge time setting method
The leading edge time [LE] and trailing edge time [TE] can be set only with time.
1.
To set the leading edge time, select the
[LE] field and then press the
ENTER
key to open the leading edge time input
field.
To set the trailing edge time, select the
[TE] field and then press the
ENTER key to open the trailing edge time
input field.
Even if there are several setting screens,
the [LE] and [TE] fields are displayed on
each page.
2.
Select the digit to be changed with the
left/right arrow keys, and increment/
decrement the value with the
up/down arrow keys or the
modify knob. The
change is instantly reflected to the output.
Alternatively, enter a numeric value using the
...
numeric keypad. Then press the
ENTER key or a unit key (soft key) to set the input value and reflect it to the output.
If the ENTER key is used, the unit is set to s.
Pulse width set with time
The pulse width time is constant
even if the frequency is changed
Pulse width set with duty
The pulse width duty is constant
even if the frequency is changed
Leading edge
time input field
ENTER
ENTER
0
9
ENTER
