118
4.
BASIC OPERATION
MULTIFUNCTION GENERATOR
4.9.5 Triggered gate oscillation
Triggered gate oscillation is gate oscillation that switches the gate on/off each time a trigger
is received.
The settings and manipulations are done on the Oscillator setting screen. “Oscillator” is
displayed at the top left of the Oscillator setting screen. When another screen is displayed,
press the
MENU key to display the top menu, then select [Oscillator] and press the
ENTER key.
a) Triggered gate oscillation example
The following example is for oscillation start/stop phase = 30°, oscillation stop unit = 1 cycle,
stop level: off.
After the gate signal becomes off, oscillation stops once the oscillation start/stop phase is
reached.
b) Setting the oscillation mode to triggered gate oscillation
Set [Mode] (oscillation mode) to [Burst] on
the oscillator setting screen. The oscilla-
tion mode is switched to the burst oscilla-
tion mode as a result. In the burst oscilla-
tion mode, the setting screen consists of
two pages, which can be toggled with the
NEXT key.
Next, set [BrstMode] (burst mode) on the
2nd page of the burst oscillation mode
setting screen to [TrigGate] (triggered gate
oscillation).
MENU
ENTER
Gate on
Gate off
Internal gate signal
Output signal
Trigger signal
Gate on
Gate off
Oscillation start/stop phase: 30°
Select [Burst] in
[Mode] and then
press the ENTER
key
NEXT
Select [TrigGate] in
[BrstMode] and
then press the
ENTER key
