4.3 Basic Settings and Operations
41
WF1973/WF1974
4.3.8 Restoring the initial settings
The initial settings can be restored from the Utility screen.
The initial settings that are restored consist of continuous oscillation, sine wave, 1 kHz, 0.1
Vp-p/open, and output off.
For a list of the initial settings,
)
p. 126.
1.
Press the
MENU key to display the
top menu window. In that window, select
[Utility] and then press the
ENTER
key to display the Utility screen.
2.
On the Utility screen, select the [Reset]
field and then press the
ENTER key.
The settings are initialized.
4.3.9 Output on/off
a) Manipulation method on panel
Each time the waveform output on/off key is pressed, the waveform
output is switched on/off. When the output is on, the lamp located to
the left of the key lights.
When the output is off, the output terminal is open. When the output is on, the output
impedance is 50
Ω
. Sync/sub output is always on regardless of the on/off setting of the
waveform output.
b) Setting at power-on
The waveform output on/off status at power-on can be specified.
The output setting at power-on can be selected from the following three.
• Off [Off]
The output is off.
• On [On]
The output is on.
In the top menu,
select [Utility] and
then press the
ENTER key.
MENU
ENTER
On the Utility
screen, select
[Reset] and then
press the ENTER
key.
ENTER
OUT
CH 1
FCTN OUT
SYNC/SUB OUT
42Vpk
Output on/off key
OUT
OUT
OUT
Output on
Output off
