Nexo ems100 Product Manual Download Page 57

Page: 57 / 62

ems100

Product Manual, Issue 4

www.nexo.com

Page 57

5.3.28 Buzzer enable (b0)

Display

Description

Enables or disables a warning buzzer for alarm conditions. Door open alarms always

sound the warning buzzer regardless of this parameter setting.

Considerations

Following alarm conditions trigger the buzzer:

Refrigeration system failure (rSF) Sensor failure (PF1, PF2). Ht alarms
Door alarms sound the buzzer as standard.

Range

00 (disabled) or 01 (enabled)

Global default

01 (enabled)

5.3.29 Saving temperature disable (PEr)

Display

Description

Disables the saving mode temperatures so that the controller maintains the
Ready mode temperatures at all times.

Disabling the Saving mode temperatures does not affect the light functionality.

Considerations

None

Range

00 (off) or 01 (on)

Global default

00 (off)

5.3.30 Learning period (LP)

Display

Description

Defines whether the controller uses a 1-day or a 7-day learning period.

Considerations

None

Range

00 (1 day) or 01 (7 days)

Global default

00 (1 day)

All manuals and user guides at all-guides.com

Summary of Contents for ems100































































Search results

Summary of Contents for ems100

Reviews:

Related manuals for ems100

Brands by name

Popular brands

Nexo ems100, Product Manual

Search results

Summary of Contents for ems100

Reviews:

Related manuals for ems100

Brands by name

Popular brands