Nexo ems100 Product Manual Download Page 45

Page: 45 / 62

ems100

Product Manual, Issue 4

www.nexo.com

Page 45

PARAMETERS

Operation parameters define the alarms, self-learning, lights management, and also the delay to saving

and the saving temperature disable. The parameter values vary between different cooler types, cooler

characteristics, operating environments, brand requirements, and operational preferences.

Parameter settings are defined by customers and can be loaded and edited automatically, via the XML files,

or manually.

This section lists the full set of parameters relevant to the ems100 controller, with their descriptions, ranges

and default values detailed for reference.

Firmware: Glass Door Cooler

5.1

Parameters by function

Temperature

Celsius or Fahrenheit (CF)

Set point (SP) and Differential (dIF)
Saving set point (SSP), Saving differential (Sd) and Saving temperature disable (PEr)

Appliance sensor: calibration 1 (CA1 )

Operation

Saving restart (Sr)
Delay to saving mode (dS )
Freeze-up protection (dtt )
Compressor rest time (rt )

Defrost

Defrost interval (dE) and Defrost duration (dd)
Defrost termination temperature (dtd)
Uninterrupted pull down (IPd)

Self-learning

Learning period (LP) and activity frequency (AF)

Display

Display (dIS ) and Display stability (d2)

Lights

Light delay (Ld) and Marketing mode (Ar)

Evaporator fan

Fan set point (FSP)

Fan cycle on (FCO) and Fan cycle off (FCF)

Alarms

Alarm delay (Ad)
Buzzer enable (b0 ) and Buzzer duration (b1)
Refrigeration system failure (Ct )
Condenser high temperature (Ht )

Voltage
management

Supply high (HI)
Supply low (L0)

Stock sensing

Shelf data enable (ShF)

All manuals and user guides at all-guides.com

Summary of Contents for ems100































































Search results

Summary of Contents for ems100

Reviews:

Related manuals for ems100

Brands by name

Popular brands

Nexo ems100, Product Manual

Search results

Summary of Contents for ems100

Reviews:

Related manuals for ems100

Brands by name

Popular brands