Nexo ems100 Product Manual Download Page 24

Page: 24 / 62

Product Manual, Issue 4

ems100

www.nexo.com

Page 24

3.6

The menu arrangement

Enter

password

Parameter

List (PS)

DIF

And so on...

Set button - press to select

Defrost button - press to return

Up button - press to scroll up

Down button - press to scroll down

Test Menu

(tSt)

Fault List

(FLt)

Half Reset

(Hr)

Full Reset

(Fr)

Data Dump

(ddP)

Enter Full

Reset Password

Relay Test

(rEL)

Compressor

(CP)

Light

(LIt)

Fan

(FAn)

Buzzer

(BUZ)

All

(ALL)

Analogue

Test (AnA)

Infrared

Test (Plr)

- use to increase value

- use to decrease value

Behind each of the sub-menu headings there is a list for further options:

Selecting PS enters the parameter list, and from here parameters and their values can be

viewed, checked and amended as required.

Selecting t St - the test menu - allows the three test routines to be carried out. Unlike previous

versions of the ems; it is now possible to simply carry out the test required - without having to

perform all three.

Selecting Hr - half re-set - will allow a half reset to be performed which will wipe the learning

matrix, allowing the controller to re-learn outlet opening and closing times.

Note

The full reset is to be performed by Elstat personnel.

The data dump is for Elstat use only for testing and development purposes.

All manuals and user guides at all-guides.com

Summary of Contents for ems100































































Search results

Summary of Contents for ems100

Reviews:

Related manuals for ems100

Brands by name

Popular brands

Nexo ems100, Product Manual

Search results

Summary of Contents for ems100

Reviews:

Related manuals for ems100

Brands by name

Popular brands