NexComm Systems NR304G-4W, User Manual

Page: 100 / 101

NEXPEED NR304G-4W User’s Manual
NexComm Systems, Inc. 99 PAGE
yqT[\
X Y [ Z
\ ] ^ _
nuk {k yk
yqT[\
X Y [ Z
\ ] ^ _
yŸR
O{ŸRP
yŸT
O{ŸTP
{ŸT
OyŸTP
{ŸR
OyŸRP
Connector Pin-outs
A.1 LAN Port
The LAN port uses an Ethernet port and supports 10/100Mbps(auto) speed on the UTP cable at a
distance of up to 100 meters or less. The Ethernet connector is a RJ-45. Table A-1 lists the pin-outs
for the Ethernet connector (labeled "LAN"). The LAN port supports MDI/MDIX feature.
Table A-1 : LAN port (RJ-45) Pin-outs
PIN # Signal Direction
1 RXD+ / TXD+ Input / Output
2 RXD- / TXD- Input / Output
3 TXD+ / RXD+ Input / Output
6 TXD- / RXD- Input / Output
A.2 Console Port
The console port is a management port. The connector is a RJ-45. Use the RJ-45-to-DB-9 female
adapter to connect the console port to a PC running terminal emulation software.
Table A-2-1 lists the pin-outs for the serial console port and table A-2-2 shows the cabling using a
DB-9 Adapter.
Table A-2-1 : Console Port (RJ-45) Pin-outs
PIN # Signal Direction Description
3 TXD Output Transmit data
5 GND - Signal ground
6 RXD Input Receive data
Table A-2-2 : Console Cable(RJ-45 to DB-9) Pin-outs
Console Port
Signal
RJ-45 # DB-9 #
Console Device
Signal
TXD 3 < --- > 2 RXD
GND 5 < --- > 5 GND
RXD 6 < --- > 3 TXD