NEXPEED NR304G-4W User’s Manual
NexComm Systems, Inc. 71 PAGE
long as they do not overlap.
COMMAND
(conf)# device mx0 bind <ifname>
Parameters
<ifname> - port name
Usage Examples:
(conf)# device mx0 bind s0
(conf)# device mx0 bind s1
This bonds ports s0 and s1 into the mx0.
(conf)# show device
name
type
side
speed
-------------------------------------------
lan
10/100BASE-T
-
auto
s0
gshdsl(ANNEX-A)
RT
auto
s1
gshdsl(ANNEX-A)
RT
auto
mx0
bind = { s1 s0 }
(conf)#
STEP3>
Using the “interface” command, set the IP address of the MXL interface or
enable bridging mode.
Note:
When the MXL interface is active, ports that are bonded into the MXL interface
will train.
Usage Examples:
(conf)# interface mx0 bridge enable
(conf)# interface mx0 ip unnumbered
To verify your changes, use the “show interface” command.
COMMAND
(conf)# show interface mx0
cf.
Once the MXL interface is enabled, you can not set bonded ports as an individual
port with the “interface” command. In this case, the router will send an error message as
soon as you try to place already configured ports into a MXL interface.
Usage Examples:
(conf)# show device
