NEXPEED NR304G-4W User’s Manual
NexComm Systems, Inc. 79 PAGE
Viewing the SNMP configuration
Displays the SNMP configuration.
COMMAND
(conf)# show snmp
Sending ‘cold-start Trap’ to the Manager manually
COMMAND
(conf)# snmp start
Deleting the SNMP Manager
COMMAND
(conf)# snmp del <address>
Parameters
<address> - Delete SNMP manager corresponding to the
specified IP address
Configuration example
Step1:
registering the “211.10.10.1” as a SNMP manager using “public” community name.
This manager can read-only for the MIB and receive the trap when the event generate to
the unit such as link down, system down and so on.
(conf)# snmp add 211.10.10.1 public read trapon
Step2:
setting the address “211.10.10.130” for the source address of trap.
(conf)# snmp authtrap on 211.10.10.130
Note:
The address is already used to your Ethernet or SHDSL interface. And you create
the SNMP node using this address.
Step3:
And then test the SNMP agent feature.
(conf)# snmp start
uyZW[nT[~
YXXUXWUXWUXZW
OshuGpwGP
zutwGt
YXXUXWUXWUX
zutwG{
zutwG
shuVpu{lyul{
zutwG
