NEXPEED NR304G-4W User’s Manual
NexComm Systems, Inc. 38 PAGE
Monitoring and Verifying Bridging
After you have set up the router for bridging, you can monitor and verify its operation
by performing the following commands.
Use the following command to view the bridged interfaces.
COMMAND
(conf)# show bridge
Use the following command to view all entries in the bridge forwarding table.
COMMAND
(conf)# show bridge map
As to forward bridged packets to the right network destination, the NR304G-4W uses a
bridge table that associates end nodes with particular connections. It builds this table
dynamically, in a process called transparent bridging.
Viewing Operation Mode of the Interface
To verify the mode of the interface, use the following command.
COMMAND
(conf)# show interface [-v|-c] [<ifname>]
Parameters
-v option provides various visual statistics regarding the interface.
-c option initializes the statistics.
<ifname> - interface name
Note:
If you omit the interface name, all interfaces are listed.
Usage Examples:
(conf)# show interface
(conf)# sh int lan
(conf)# sh int s0
