7106505516 REV2.0.0
TL-WR843N
300Mbps Wireless AP/Client Router
Quick
Installation Guide
Getting Started
WISP Client Router Mode
Configure the Router
Operating Modes
WISP Client Router
Standard Wireless Router
Scenarios
The wired network is only limited to one device to connect at a
time, but I want to share the Internet with more wireless
devices.
I want to connect to a Wireless Internet Service Provider (WISP),
and share the Internet with local devices.
Which mode do you need? Please refer to the table to choose the appropriate operation
mode.
You can configure the router using the Setup Wizard on the supplied CD-ROM (for
Windows only), or simply follow the specific instructions in this Quick Installation Guide
for your selected operation mode.
1
Connect the power adapter to your router and plug the power adapter into an outlet, and then
press the
ON/OFF
button to turn on the router.
2
Connect your device to the router wirelessly or via an Ethernet cable. The Wi-Fi network name
and password is on the router’s label.
3
Launch a web browser and type
http://tplinkwifi.net
into the address bar. Enter
admin
(in
lowercase) for both user name and password to log in.
4
Click
Quick Setup
on the left panel and click
Next
to start configuring the router. Select the
Control the system mode by software
checkbox. Select
WISP Client Router
mode and click
Next
.
5
Select the
WAN Connection Type
of your Internet Service Provider and follow the
screen instructions to configure the router. In the most common setup, select
Dynamic IP
.
6
On the Wireless screen, click
Survey
to automatically find all available networks.
7
Click
Connect
button next to the Wi-Fi network you want to connect to.
8
Type in the selected Wi-Fi network's password when prompted. In the AP settings
section, customize your Wi-Fi network name and password, then click
Next
.
9
Click
Reboot
to complete the configuration.
Note:
1. The passive PoE injector supports a cable length up to 30 meters
due to the environment.
2. If you need a longer data transmission distance (not exceeding 100
meters), TP-LINK’s 48V PoE adapters such as TL-POE200,
TL-POE150S and TL-POE10R are recommended.
Product information can be found on our official website
http://www.tp-link.com.
Enjoy!
Public Wi-Fi
Network Name
TL-WR843N’s
Wi-Fi Name
LAN (1/2/3/4)
ON/OFF POWER
INTERNET
ROUTER WISP
1
2
3
4
WPS/
RESET
or
Public Wi-Fi
Network Name
TL-WR843N’s
Wi-Fi Name
ON/OFF POWER
INTERNET
ROUTER WISP
1
2
3
4
WPS/
RESET
or
Passive PoE Injector
Power the router with the included passive PoE injector.
Use this when the router is installed in a location far from a power outlet.
*
