5
1.0 Technical and emission data.
Easedale 5 SE
Material:
Steel and cast iron.
Finish:
High-temp resistant paint.
Fuel:
Wood (Approved wood logs)
Approved smokeless fuels
Log length:
25cm maximum
Flue outlet:
Top or rear
Flue pipe dimension:
Internal diameter 125mm / 122.7cm2 cross section
Approx. weight:
65kgs
Dimensions, distances etc:
Figure 2 & 2A
Technical data according to EN 13240+A2:2004.
Nominal heat output:
Wood:
5.0kw
Approved smokeless fuel:
5.0kw
Flue gas mass flow:
Wood:
3.9 g/sec
Approved smokeless fuel:
3.6 g/sec
Recommended chimney draught:
12.5 Pa
Efficiency net:
Wood:
80.7 %
Efficiency net:
Approved smokeless fuel:
79%
CO emission (13% O
2
):
Wood:
0.10%
Approved smokeless fuel:
0.07%
Mean flue gas temperature: Wood:
278
0
C
Approved smokeless fuel:
290
0
C
Operational mode:
Intermittent
Summary of Contents for Easedale 5 SE
