45
Smoke emission troubleshooting
Problem
Probable Cause
Action
Small flames and smoke
Wet wood
Use dry seasoned hardwood.
(Over 20% moisture content)
(Less than 20% moisture content)
When appliance door is opened
Flue draught low
Consult your stove installer
smoke spillage enters the room
Room ventilation not correct
Consult your stove installer
Evacuate all people from the room into
a safe area. If safely possible open all
outside doors and widows to the
effected room to ventilate. Vacate the
Smoke is emitted into the room
Flue blocked
room into a safe area. Allow the stove to
fully burn out.
Consult your stove installer.
Do not
re use the stove until
the problem is fully rectified
The chimney is emitting grey / blue
Wet wood
Use dry seasoned hardwood.
smoke
(Over 20% moisture content)
(Less than 20% moisture content)
Summary of Contents for Easedale 5 SE
