Newland NLS-HR15XX-30 User Manual Download Page 91

Page: 91 / 104

【

Start Setup

】

【

Exit Setup

】

Allow to Read MicroPDF417

Prohibit Reading MicroPDF417

Note: the scanner will become unable to read MicroPDF417 by reading the setup barcode “Prohibit Reading

MicroPDF417”, thus, if the scanner is unable to read the MicroPDF417, please try to read the setuo barcode

“allow to read MicroPDF417”.

Note: MicroPDF417 support the barcode with maximum 255 bytes.

CodeID Setup

To activate the setup function by reading “CodeID setup”, then read the hexadcimal value inaccordance with the character

which will be set to the CodeID.

Code ID Setup

Example: Set the CodeID ofMicroPDF417

to “p” (the hexadcimal value is 0x70).

Read the “Start Setup” barcode.

Read the “CodeID Setup” barcode.

Read the numeric barcode “7”, “0” (see the appendix—numeric barcode)

Read the “Save” barcode.(see the appendix—numeric barcode)

5. Read the

“Exit Setup” barcode.

Summary of Contents for NLS-HR15XX-30









































































































Search results

Summary of Contents for NLS-HR15XX-30

Reviews:

Related manuals for NLS-HR15XX-30

Brands by name

Popular brands

Newland NLS-HR15XX-30, User Manual

Search results

Summary of Contents for NLS-HR15XX-30

Reviews:

Related manuals for NLS-HR15XX-30

Brands by name

Popular brands