Newland NLS-HR15XX-30, User Manual

Page: 80 / 104

【
Start Setup
】
70 【
Exit Setup
】
Set the Minimum Length Limit
Set the Maximum Length Limit
Note
：
the maximum length limit of any 1D barcode must not exceed 255, if the maximum length is shorter than the
minimum length, then the scanner is only able to read the barcodes with the minimum length and the the maximum length;
if the maximum length equals to the minimum length, then the scanner is only able to read the barcode with such length.
Example: The steps of set the scanner read the Codabarwith barcode length between 8 to 12 characters.
1. Read the
“Start Setup” barcode.
2.
Read the barcode of “Set the Minimum Length Limit”.
3.
Read the numeric barcode “8”, (see the appendix—numeric barcode)
4. Read
the “Save” barcode.(see the appendix—numeric barcode)
5.
Read the barcode of “Set the Maximum Length Limit”.
6.
Read the numeric barcode “1”.
7.
Read the numeric barcode “2”.
8. Read
the “Save” barcode.(see the appendix—numeric barcode)
9. Read the
“Exit Setup” barcode.
Code 93
Restore the Default Value
By reading the barcode, the parameter setup of Code 93 will be restored to the factory default state.
Restore the Default Setup Value of Code 93
Allow to Read Code 93 or not
Allow to Read Code 93
Prohibit Reading Code 93
Note: the scanner will become unable to read Code 93 by reading the setup barcode “Prohibit Reading Code 93”, thus, if
the scanner is unable to read the Code 93, please try to read the setuo barcode “allow to read Code 93”.