Newland NLS-HR15XX-30, User Manual

Page: 41 / 104

【
Start Setup
】
【
Exit Setup
】 31
It is not Allow to Add Custom Prefix
Allow to Add Custom Prefix
Define the Custom Prefix
Read the “Set the Custom Prefix” first, and then read the hexadecimal value of every byte of the prefix character string
which will be set according to priority.
Set custom prefixes
For example: set the custome prefix to “CODE” (the hexadecimal value is 0x43/0x4F/0x44/0x45)
1.
Read the “Start Setup” barcode.
2.
Read the ”Set the Custom Prefix” barcode.
3.
Read the following number code:“4”,“3”,“4”,“F”,“4”,“4”,“4”,“5”
4. Read the
“Save” barcode.
5. Read the
“Exit Setup”barcode.
After the setup of “it is allowed to add custom profix”is finished, by reading any barcode, the scanner will add custom prefix
character string “CODE” before the data.
AIM ID Prefix
AIM is abbreviation of
”Automatic Identification Manufacturers”, AIMID defines the identifier for every kind of standard
barcode, see the appendix. After decoding, the scanner can add the identifier before the barcode data, which can be
regarded as AIMID prefix.
It is not Allow to Add AIMID Prefix
Allow to Add AIMID Prefix
Code ID Prefix
Except for using AIM prefix to identify different barcode, the customers also can use CodeID prefix to perform the same
function. Different from the AIM prefix, the customer can define the CodeId prefix corresponding to every kind of barcode.
The CodeID of all the barcodes includes one or two characters, which must be alphabet and can not be set as