Newland NLS-HR15XX-30 User Manual Download Page 48

Page: 48 / 104

【

Start Setup

】

【

Exit Setup

】



Read the barcode of “Set the Minimum Length Limit” to adjust the minimum length limit



Read the barcode of “Set the Maximum Length Limit” to adjust the maximum length limit

Set the Maximum Length Limi

Set the Minimum Length Limit

Note

：

the maximum length limit of any 1D barcode must not exceed 255, if the maximum length is shorter than the

minimum length, then the scanner is only able to read the barcodes with the minimum length and the the maximum length;

if the maximum length equals to the minimum length, then the scanner is only able to read the barcode with such length.

Example: Set the scannerread the UCC/EAN-128 with barcode length between 8 to 12 characters.

Read the

“Start Setup” barcode.

Read the barcode of “Set the Minimum Length Limit”.

Read the numeric barcode “8”, (see the appendix—numeric barcode)

Read

the “Save” barcode. (see the appendix—numeric barcode)

Read the barcode of “Set the Maximum Length Limit”.

Read the numeric bar

code “1”.

Read the numeric barcode “2”.

Read

the “Save” barcode.(see the appendix—numeric barcode)

Read the

“Exit Setup” barcode.

AIM 128

Restore Default Value

By reading the barcode, the parameter setup of UCC/EAN-128 will be restored to the factory default state.

Restore the Default Setup Value of UCC/EAN-128

AIM 128 Allow to Read AIM-128 or not

Allow to Read AIM-128

Prohibit Reading AIM-128

Note:the scanner will become unable to read AIM-

128 by reading the setup barcode “Prohibit Reading AIM-128”, thus, if

the scanner is unable to read the AIM-

128, please try to read the setuo barcode “allow to read AIM-128”.

Summary of Contents for NLS-HR15XX-30









































































































Search results

Summary of Contents for NLS-HR15XX-30

Reviews:

Related manuals for NLS-HR15XX-30

Brands by name

Popular brands

Newland NLS-HR15XX-30, User Manual

Search results

Summary of Contents for NLS-HR15XX-30

Reviews:

Related manuals for NLS-HR15XX-30

Brands by name

Popular brands