Newland NLS-HR15XX-30, User Manual

Page: 49 / 104

【
Start Setup
】
【
Exit Setup
】 39
Code ID Setup
To activate the setup funct
ion by reading “CodeID setup”, then read the hexadcimal value inaccordance with the character
which will be set to the CodeID.
CodeID Setup
Example: Set the CodeID of AIM-
128 to “p” (the hexadcimal value is 0x70):
1.
Read the “Start Setup” barcode.
2. Read
the “CodeID Setup” barcode.
3.
Read the numeric barcode “7”, “0” (see the appendix—numeric barcode)
4.
Read the “Save” barcode.(see the appendix—numeric barcode)
5.
Read the “Exit Setup” barcode.
Set the Barcode Reading Length
The scanner is only able to read the AIM-128 whose tramsmission content length is in the limited range, the range is
consisted of the maximum value and minimum value in units of character (the maximum value and minimum value also
included), The AIM-128 exceeds the range can not be read or transmitted.
 Read the barcode of “Set the Minimum Length Limit” to adjust the minimum length limit.
 Read the barcode of “Set the Maximum Length Limit” to adjust the maximum length limit
Set the Maximum Length Limi
Set the Minimum Length Limit
Note
：
the maximum length limit of any 1D barcode must not exceed 255, if the maximum length is shorter than the
minimum length, then the scanner is only able to read the barcodes with the minimum length and the the maximum length;
if the maximum length equals to the minimum length, then the scanner is only able to read the barcode with such length
Example: Set the scanner read the AIM128 with barcode length between 8 to 12 characters.
1. Read the
“Start Setup” barcode.
2.
Read the barcode of “Set the Minimum Length Limit”.
3.
Read the numeric barcode “8”, (see the appendix—numeric barcode)
4.
Read the ‘Save” barcode.(see the appendix—numeric barcode)
5.
Read the barcode of “Set the Maximum Length Limit”
6.
Read the numeric barcode “1”.
7.
Read the numeric barcode “2”.