Newland NLS-HR15XX-30, User Manual

Page: 63 / 104

【
Start Setup
】
【
Exit Setup
】 53
ITF-6
TIF-6 is a knid of special Interleaved2 of 5 barcode with the barcode length of 6 characters and the last character as the
check character. By default, no special processing is performed on ITF-6, its setup is the same with the normal
Interleaved2 of 5.
TF-6 priority principle: if the setup of ITF-6 has been changed, then the setup of all the Interleaved2 of 5 barcode with the
barcode length of 6 characters and the last character as the check character should be in accordance with ITF-6.
Restore the Default Setup Value of ITF-6
Prohibit Reading ITF-6
Allow to Read ITF-6, but do not Transmit the Check Digit
Allow to Read ITF-6 and Transmit the Check Digit
Note: if the setup of ITF-6 confilits with the setup of Interleaved2 of 5.for example, reading ITF-6 is allowed, but
reading Interleaved2 of 5 is not, according to the priority principle of ITF-6, the Interleaved2 of 5 with the barcode
length of 6 characters and the last character as the check character can be read, but other Interleaved2 of 5
barcodes can not be read.
Code ID Setup
To activate the set
up function by reading “CodeID setup”, then read the hexadcimal value inaccordance with the character
which will be set to the CodeID.
CodeID Setup
Example: Set the CodeID ofITF-6
to “p” (the hexadcimal value is 0x70).
1.
Read the “Start Setup” barcode.
2.
Read the “CodeID Setup” barcode.
3.
Read the numeric barcode “7”, “0” (see the appendix—numeric barcode)