Newland NLS-BS30 User Manual Download Page 53

Page: 53 / 247

Chapter 4 USB Interface

Introduction

There are four options for USB connection:



USB HID Keyboard: The scanner’s transmission is simulated as USB keyboard input with no need for command

configuration or a driver. Barcode data could be entered by the virtual keyboard directly and it is also convenient for

the host device to receive data.



USB CDC: It is compliant with the standard USB CDC class specifications defined by the USB-IF and allows the host

device to receive data in the way as a serial port does. A driver is needed when using this feature.



HID POS (POS HID Barcode Scanner): It is based on the HID interface, with no need for a custom driver. It excels

virtual keyboard interface in transmission speed.



IBM SurePOS: It conforms to IBM (now Toshiba Global Commerce Solutions) 4698 USB scanner interface

specifications.

Summary of Contents for NLS-BS30
























































































































































































































































Search results

Summary of Contents for NLS-BS30

Reviews:

Related manuals for NLS-BS30

Brands by name

Popular brands

Newland NLS-BS30, User Manual

Search results

Summary of Contents for NLS-BS30

Reviews:

Related manuals for NLS-BS30

Brands by name

Popular brands