Newland NLS-BS30 User Manual Download Page 97

Page: 97 / 247

Enter Setup

** Exit Setup

EAN-13 Beginning with 979 Add-On Code Required

This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-

13 barcodes that begin with “979”.

The following settings can be programmed:

Require Add-On Code:

All EAN-13 barcodes that begin with

“979” must have a 2-digit or 5-digit add-on code. The EAN-13

barcode with the add-on code is then transmitted. If the required add-on code is not found, the EAN-13 barcode is discarded.

Do Not Require Add-On Code:

If you have selected

Require Add-On Code

, and you want to disable this feature, scan

Do Not Require Add-On Code

. EAN-13 barcodes are handled, depending on your selection for the

“Add-On Code Required”

feature.

Do Not Require Add-On Code

Require Add-On Code

Summary of Contents for NLS-BS30
























































































































































































































































Search results

Summary of Contents for NLS-BS30

Reviews:

Related manuals for NLS-BS30

Brands by name

Popular brands

Newland NLS-BS30, User Manual

Search results

Summary of Contents for NLS-BS30

Reviews:

Related manuals for NLS-BS30

Brands by name

Popular brands